Sub-menu 1
Sub-menu 2
Settings
Code
First Ring
*2,
*8
–
1:
<
On
>
0:
Off
#173
–
Main menu:
“
Caller Barred
”
*2, *13
Operation
Code
Storing/Viewing bar call numbers.
#217
28
*1 KX-TG6821 series: page 3
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset. (KX-TG6812)
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*5 KX-TG6812
*6 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*7 The preset melodies in this product (
“
Ringtone 3
”
-
“
Ringtone 40
”
) are used with
permission of © 2012 Copyrights Vision Inc.
*8 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*9 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*12 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*13 KX-TG6811 series: page 3
Special programming
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R
Set the date and time beforehand
(page 13).
1
M
N#720
2
Select an alarm by pressing
1
to
3
.
a
M
OK
N
26
Programming
TG68xxSA(en)_0619_ver011.pdf 26
2013/06/19 17:43:16