Panasonic KX-TG6671C, Руководство по эксплуатации

Страница: 39 / 52

Intercom
Intercom calls can be made:
– between the base unit and a handset
– between handsets
Note:
R If you receive an outside call while talking on the
intercom, you hear 2 tones.
– To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
M N 2 times.
– To answer the call with the handset, press
M OFF N , then press M N .
R When paging unit(s), the paged unit(s) beeps
for 1 minute.
Making an intercom call
Base unit
1
Press M INTERCOM N .
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
R Lift the corded handset if needed.
R To stop paging, press M INTERCOM N .
2
When you finish talking, press M INTERCOM N
or place the corded handset on the cradle.
Handset
1
M MENU N a M INT N
2
MbN : Select the desired unit. a M SELECT N
R To stop paging, press M OFF N .
3
When you finish talking, press M OFF N .
Answering an intercom call
Base unit
1
Lift the corded handset or press M INTERCOM N
to answer the page.
2
When you finish talking, place the corded
handset on the cradle or press
M INTERCOM N .
Handset
1
Press M N to answer the page.
2
When you finish talking, press M OFF N .
Handset locator
You can locate a misplaced handset by paging it.
1
Base unit: Press M LOCATOR N .
R All registered handsets beep for 1 minute.
2
To stop paging:
Base unit:
Press M LOCATOR N .
Handset:
Press M N , then press M OFF N .
Transferring calls,
conference calls
Outside calls can be transferred or a conference
call with an outside party can be made:
– between the base unit and a handset
– between 2 handsets
Base unit
1
During an outside call, press M INTERCOM N .
When 2 or more handsets are registered:
– To page a specific handset, enter the
handset number.
– To page all handsets, press 0 or wait for a
few seconds.
2
Wait for the paged party to answer.
R If paged party does not answer, press
M INTERCOM N to return to the outside call.
3
To complete the transfer:
Place the corded handset on the cradle.
R The outside call is being routed to the
handset.
To establish a conference call:
Press M CONF N .
R To leave the conference, place the corded
handset on the cradle. The other 2 parties
can continue the conversation.
R To put the outside call on hold, press
M HOLD N . To resume the conference, press
M CONF N .
Handset
1
During an outside call, press M INT N to put the
call on hold.
2
MbN : Select the desired unit. a M SELECT N
3
Wait for the paged party to answer.
R If the paged party does not answer, press
M N to return to the outside call.
39
Intercom/Locator