Useful Information
41
Error messages
*1 KX-TG6621/KX-TG6622
Display message
Cause/solution
Base no power
or
No link. Reconnect
AC adaptor.
or
No link.
L
The handset has lost communication with the base unit. Move
closer to the base unit and try again.
L
Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L
The handset’s registration may have been cancelled. Re-
register the handset (page 28).
L
When
“
No link.
”
is displayed during a power failure, place
a handset on the base unit to supply power to the base unit.
Check Phone Line
L
The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 9).
Error
*1
L
Recording was too short. Try again.
Failed
L
Phonebook copy failed (page 21). Confirm the other handset
(the receiver) is in standby mode and try again.
Incomplete
L
The receiver’s phonebook memory is full. Erase the
unwanted phonebook entries from the other handset (the
receiver) and try again.
Memory Full
L
The phonebook memory is full. Erase unwanted entries (page
20).
L
Message memory is full. Erase unwanted messages (page
33, 34).
*1
L
The call barred list memory is full. Erase unwanted entries
(page 27).
Use rechargeable
battery.
L
A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 6.
You must first
subscribe to Caller
ID.
L
You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
TG6611_6621NZ(e).book Page 41 Monday, February 14, 2011 8:43 AM