Getting Started
16
One touch eco mode
When the handset is on the base unit, the base
unit transmission power is reduced up to
99.9% if only one handset is registered.
Even when the handset is not on the base unit
or several handsets are registered, the base
unit transmission power in standby mode can
be reduced up to 90% by activating one touch
eco mode.
You can turn on/off one touch eco mode by just
pressing
{
ECO/R
}
. The default setting is
“
Normal
”
.
– When the one touch eco mode is on:
“
Low
”
is temporarily displayed and
i
is shown
on the handset display instead of
w
.
– When the one touch eco mode is off:
“
Normal
”
is temporarily displayed and
i
goes off from the handset display.
Note:
L
When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
L
Activating one touch eco mode reduces the
range of the base unit in standby mode.
L
If you set the repeater mode to
“
On
”
(page
31):
– One touch eco mode is cancelled.
–
“
Eco Setup
”
is not shown in the display
menu (page 25).
Wall mounting
Note:
L
Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
■
Base unit (KX-TG6611/KX-TG6612)
■
Base unit (KX-TG6621)
*1 When mounting the base unit on a wall, do
not pass the cords through these hooks.
■
Charger
Screws
(Not supplied)
*1
56 mm
Hook
Hooks
Screws
(Not supplied)
83 mm
*1
*1
25 mm
Screws
(Not supplied)
Hooks
TG661x_662xFX(e).book Page 16 Wednesday, March 2, 2011 2:31 PM