Getting started
9
Note when setting up
Note for connections
L
The AC adaptor must remain connected at all
times. (It is normal for the adaptor to feel warm
during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC outlet.
Do not connect the AC adaptor to a ceiling-
mounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The base unit will work as a standard telephone
using power from the telephone line, so you can
make and answer outside calls with the corded
handset. However, this operation may not work
properly depending on area or telephone line’s
condition. The base unit speakerphone and the
cordless handset will not function during a power
failure.
Note for battery installation
L
Use the supplied rechargeable batteries. For
replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 3, 5.
L
Wipe the battery ends (
S
,
T
) with a dry cloth.
L
Avoid touching the battery ends (
S
,
T
) or the
unit contacts.
Note for battery charge
L
It is normal for the handset to feel warm during
charging.
L
Clean the charge contacts of the handset and
charger with a soft and dry cloth once a month.
Clean more often if the unit is exposed to
grease, dust, or high humidity.
Battery level
Panasonic Ni-MH battery performance
(supplied batteries)
Note:
L
It is normal for batteries not to reach full capacity
at the initial charge. Maximum battery
performance is reached after a few complete
cycles of charge/discharge (use).
L
Actual battery performance depends on a
combination of how often the handset is in use
and how often it is not in use (standby).
L
Even after the handset is fully charged, the
handset can be left on the charger without any ill
effect on the batteries.
L
The battery level may not be displayed correctly
after you replace the batteries. In this case,
place the handset on the charger and let it
charge for at least 7 hours.
Icon
Battery level
&
High
(
Medium
)
Low
0
)
4
Needs charging.
Operation
Operating time
In continuous use
18 hours max.
Not in use (standby)
170 hours max.
TG6451_6461FX(e-e).book Page 9 Monday, May 4, 2009 8:55 AM
