Useful Information
44
Programmable settings
Battery recharge
Making/answering calls, intercom
Problem
Cause/solution
I have changed the display
language to a language I cannot
read.
L
Change the display language (page 14).
While programming, the unit starts
to ring.
L
A call is being received. Answer the call and start again after
hanging up.
While programming, the display
returns to standby mode.
L
A call matching an entry in the call barred list is being received.
Wait and try again later.
I cannot register a handset to a
base unit.
L
The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 27).
L
You entered the wrong PIN. If you forget your PIN, contact an
authorised service centre.
L
Place the handset and the base unit away from other electrical
appliances.
Problem
Cause/solution
The handset beeps and/or
)
flashes.
L
Battery charge is low. Fully charge the batteries (page 8).
I fully charged the batteries, but
)
still flashes.
L
Clean the charge contacts and charge again (page 9).
L
It is time to replace the batteries (page 8).
I fully charged the batteries, but
the operating time seems to be
shorter.
L
Clean the battery ends (
S
,
T
) and the charge contacts with a
dry cloth and charge again.
The handset display is blank.
L
The handset is not turned on. Turn the power on (page 13).
Problem
Cause/solution
w
is flashing.
L
The handset is too far from the base unit. Move closer.
L
The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
L
You are using the base unit or handset in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
L
The handset is not registered to the base unit. Register it (page
27).
Noise is heard, sound cuts in and
out.
L
You are using the base unit or handset in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
L
Move closer to the base unit.
L
If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
TG6451_6461FX(e-e).book Page 44 Monday, May 4, 2009 8:55 AM