Answering System
35
unauthorized parties from listening to
your messages remotely. The default
setting is
“
111
”
.
1
{
MENU
}
i
{#}{
3
}{
0
}{
6
}
2
Enter the desired 3-digit remote
access code.
i
{
SAVE
}
i
{
OFF
}
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts,
enter your remote access code.
L
The unit plays back new
messages.
3
Follow the voice guidance prompts
as necessary or control the unit
using remote commands (page 35).
4
When finished, hang up.
Note:
L
You can also leave a message just as
any outside caller can. After the
greeting message starts, press
{*}
to
skip the greeting message and record
your message after the beep.
Voice guidance
During remote operation, the unit’s voice
guidance starts and prompts you to
press
{
1
}
to perform a specific
operation, or press
{
2
}
to listen to more
available operations. Operations are
presented by voice guidance in the
following order:
– Play back all messages
– Play back new messages
– Record your message
– Erase all messages
Note:
L
If you do not press any dial keys within
10 seconds after a voice guidance
prompt, the unit disconnects your call.
Remote commands
You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
*2 To resume operation, enter a remote
command within 15 seconds, or the
voice guidance starts.
Turning on the answering
system remotely
If the answering system is off, you can
turn it on remotely.
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 15 times.
L
A long beep is heard.
Key
Operation
{
1
}
Repeat message
(during playback)
*1
{
2
}
Skip message
(during playback)
{
4
}
Play new messages
{
5
}
Play all messages
{
9
}
Stop playback
*2
{
0
}
Turn answering system
off
{*}{
4
}
Erase currently playing
message
{*}{
5
}
Erase all messages
TG64xxC(e).book Page 35 Monday, December 22, 2008 4:02 PM
