Panasonic KX-TG5664 Скачать руководство пользователя страница 48

Страница: 48 / 64

Useful Information

For assistance, please visit http://www.panasonic.com/phonehelp

Error messages

If the unit detects a problem, one of the following messages is shown on the display.

Display message

Cause/solution

Busy

The called base unit is in use.

Another handset or the called handset is in use.

The handset you tried to copy phonebook items to is in
use.

The handset you are calling is too far from the base unit.

Error!!

The handset’s registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.

Another handset user tried to send phonebook items to
you but there was an error. Have the other handset user
re-send the items to you (page 25).

---Incomplete---
Phonebook full

The destination unit’s phonebook memory is full. Erase
unnecessary items from the destination unit’s
phonebook (page 24).

Invalid

There is no handset registered to the base unit
matching the extension number you entered.

No items stored

Your phonebook or redial list is empty.

No link to base.
Move closer to
base, try again.

The handset has lost communication with the base unit.
Move closer to the base unit, and try again.

Confirm that the base unit’s AC adaptor is plugged in.

Raise the base unit antennas.

The handset’s registration may have been canceled.
Re-register the handset (page 44).

Phonebook full

There is no space to store new items in the phonebook.
Erase unnecessary items (page 24).

Please lift up and
try again.

A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.

System is busy.
Please try again
later.

Other units are in use and the system is busy. Try again
later.

Another user is listening to messages. Try again later.

TG5664(e).book Page 48 Monday, March 6, 2006 11:15 AM

Содержание KX-TG5664

































































Результаты поиска

Содержание KX-TG5664

Отзывы:

Похожие инструкции для KX-TG5664

Бренды по названию

Популярные бренды

Panasonic KX-TG5664, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG5664

Отзывы:

Похожие инструкции для KX-TG5664

Бренды по названию

Популярные бренды