Panasonic KX-TG5571M Скачать руководство пользователя

Страница: 75 / 92

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

---Incomplete---
Tom Jones
555-765-4321

(The name/number is an
example.)

The destination handset is out of area.

The destination handset user may have pressed

{C}

{s}

Invalid

There is no handset registered to the base unit
matching the extension number you entered.

You selected your own extension number.

You cannot rename the preset song.

Invalid.
Please register
to the base unit

The handset you tried to call has not been registered to
the base unit. Register the handset (page 59).

Memory full

There is no space in memory to record new songs.
Erase unnecessary songs.

No items stored

Your phonebook or redial list is empty.

Color display models (KX-TG5576 and KX-TGA552
only):
“

User data

” is empty. You can download your original

data for the wallpaper and picture ID from a PC. Refer
to the help section of the GIGARANGE USB Utility
software for details.

No link to base.
Move closer to
base, try again.

The handset has lost communication with the base unit.
Move closer to the base unit, and try again.

Confirm that the base unit’s AC adaptor is plugged in.

Raise the base unit antennas.

The handset’s registration may have been canceled.
Re-register the handset (page 59).

Not erasable

You cannot erase the preset song.

Phonebook full

There is no space to store new items in the phonebook.
Erase unnecessary items (page 29).

Please lift up and
try again.

A handset button was pressed while the handset was
on the base unit or charger. Lift the handset and press
the button again.

System is busy.
Please try again
later.

The handset has lost communication with the base unit.
Move closer to the base unit, and try again.

Other units are in use and the system is busy. Try again
later.

Another user is listening to messages. Try again later.

Display message

Cause & solution

TG5571_5576.book Page 75 Friday, June 10, 2005 6:46 PM

Содержание KX-TG5571M





























































































Результаты поиска

Содержание KX-TG5571M

Отзывы:

Похожие инструкции для KX-TG5571M

Бренды по названию

Популярные бренды

Panasonic KX-TG5571M, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG5571M

Отзывы:

Похожие инструкции для KX-TG5571M

Бренды по названию

Популярные бренды