Panasonic KX-TG5571M Скачать руководство пользователя

Страница: 77 / 92

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

Making/answering calls, Intercom

While programming, the
handset starts to ring.

A call is being received. Answer the call and start again
from the beginning after hanging up.

I cannot record,
download, or erase
songs, and “

Recharge

battery

” is displayed.

I cannot download or
erase pictures, and
“

Recharge battery

” is

displayed.

The battery power is low. Fully charge the battery (page
13) and try again.

Problem

Cause & solution

Static is heard, sound
cuts in and out.
Interference from other
electrical units.

Move the handset and the base unit away from other
electrical appliances.

Move closer to the base unit.

Raise the base unit antennas.

Turn on the clarity booster feature (page 22).

If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.

The handset and base
unit do not ring.

The ringer volume is turned off. Adjust it (page 26, 49).

I cannot make a call.

The dialing mode may be set incorrectly. Set the dial
mode (page 19) to match the type of telephone service
you have (tone or pulse).

If the base unit (including answering system) or another
handset is in use, you may not be able to make a call.
Try again later.

While listening to messages using the handset, you
cannot make a call. Exit by pressing

{

OFF

}

I cannot redial by
pressing

{

REDIAL

}

If the last number dialed was more than 48 digits long,
the number will not be redialed correctly.

If you press

{

REDIAL

}

after you have started dialing,

this button functions as the

{

PAUSE

}

button. To redial,

do not dial any numbers before pressing

{

REDIAL

}

I cannot have a
conversation using the
headset.

Make sure that an optional headset is connected
properly (page 73).

If “

SP-phone

” is displayed on the handset, press

{C}

to switch to the headset.

I cannot make long
distance calls.

Make sure that you have long distance service.

Problem

Cause & solution

TG5571_5576.book Page 77 Friday, June 10, 2005 6:46 PM

Содержание KX-TG5571M





























































































Результаты поиска

Содержание KX-TG5571M

Отзывы:

Похожие инструкции для KX-TG5571M

Бренды по названию

Популярные бренды

Panasonic KX-TG5571M, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG5571M

Отзывы:

Похожие инструкции для KX-TG5571M

Бренды по названию

Популярные бренды