Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp
105
Phonebook
I cannot redial the last
number dialed.
L
If the last number dialed was more than 32 digits, the
number will not be redialed correctly.
L
Access numbers entered after pressing
{
TONE
}
will not
be included when redialing.
L
Cordless handset only:
The
{
REDIAL
}
key also
functions as the
{
PAUSE
}
key. It will redial the last
number dialed if pressed at the outset of a call. If
another number has been dialled first, it will operate as
a
{
PAUSE
}
key.
I cannot page another
cordless handset or the
base unit.
L
If four other cordless handsets are in use, you may not
be able to page. Try again later.
L
The cordless handset is too far from the base unit.
L
The base unit or the cordless handset is in use. Try
again later.
When a second call is
received on the same
line, the unit does not
display the new caller’s
information.
L
If another call is received on the same line while;
– the Automated Attendant System or Answering
System is responding to a call, or
– a call is placed on hold, the caller information will not
be displayed.
L
The line mode selection is incorrect. See page 25.
Problem
Cause and solution
I cannot store a name and
phone number in the
Phonebook.
L
You cannot store an item in the Phonebook while the
corded handset is off the cradle or the
{
SP-PHONE
}
indicator is lit.
L
You cannot store an item in the Phonebook while the
unit is in talk or intercom mode.
L
Do not pause for over 60 seconds while programming.
The display goes into
standby mode while
viewing the Phonebook.
L
Do not pause for over 60 seconds while searching.
While searching, the
base unit/cordless
handset starts to ring.
L
A call is being received. Answer the call and re-start
searching from the beginning after hanging up.
Problem
Cause and solution