Panasonic KX-TG4500 - Cordless Phone And 4 Handsets страница 101 Скачать руководство пользователя

Страница: 101 / 124

Useful Information

For assistance, please visit http://www.panasonic.com/phonehelp

101

No link to the
base. Please walk
closer to the base
and try again.

(cordless handset only)

The cordless handset has lost communication with the
base unit. Walk closer to the base unit, and try again.

Not Available.
Maximum handsets
already registered

(cordless handset only)

Eight cordless handsets have already been registered
to the base unit. To cancel another cordless handset
registration, see page 27.

Please enter
another password.

You selected a password which is the same as another
mailbox (page 51). Select another one.

Please lift up and
try again.

(cordless handset only)

You attempted to dial from the cordless handset while
located in the charger. Lift the handset out of the
charger and try again.

Please set the
alert number.

You tried to check the number or set the unit to call the
cell phone/paging device without first storing the cell
phone/paging device number (page 85).

Please set the
system date and
time first.

(base unit only)

You must set the date and time before you can program
the system to automatically delete messages monthly
(page 87).

Recharge Battery

(cordless handset only)

The cordless handset battery needs to be charged.
Recharge the battery by placing it on the charger.

Sorry, this mailbox
is in use.

While another user is listening to messages in the
general delivery mailbox, you cannot access that
mailbox (pages 52 and 56).

The system is busy.
Please try again
later.

All lines are in use. You cannot make a call. Try again
later.

If four cordless handsets or the base unit and three other
cordless handsets are in use:

you may not be able to program certain function items,
such as, setting your password or turning on/off alerting
your cell phone/paging device,

you may not be able to make an external or internal call,
or

you may not be able to listen to messages in your
mailbox.

Try again later.

Users in mailbox.
Please try again
later.

You tried to erase mailbox messages while the selected
mailbox(es) is being accessed (page 78). Try again
later.

Display message

Cause and solution

Содержание KX-TG4500 - Cordless Phone And 4 Handsets





























































































































Результаты поиска

Содержание KX-TG4500 - Cordless Phone And 4 Handsets

Отзывы:

Похожие инструкции для KX-TG4500 - Cordless Phone And 4 Handsets

Бренды по названию

Популярные бренды

Panasonic KX-TG4500 - Cordless Phone And 4 Handsets, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG4500 - Cordless Phone And 4 Handsets

Отзывы:

Похожие инструкции для KX-TG4500 - Cordless Phone And 4 Handsets

Бренды по названию

Популярные бренды