Useful Information
17
Registration
Liquid damage
Caution:
L
To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
Problem
Cause/solution
The handset registration may
have been canceled or the
communication between the
base unit and the handset is
unstable.
L
Re-register the handset.
1
Base unit:
Press and hold
{x}
(Locator)
for about 4 seconds. (No registration
tone)
– The next step must be completed
within 90 seconds.
2
Handset:
Press and hold
{
FLASH
}
until
the TALK indicator flashes, then wait until
the handset beeps.
L
If the above remedy does not solve the
problem, contact your nearest Panasonic
service center.
Problem
Cause/solution
Liquid or other form of moisture
has entered the handset/base
unit.
L
Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least
3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and
charge fully before use. If the unit does not
work properly, contact an authorized service
center.
TG360x(e).book Page 17 Tuesday, February 3, 2009 5:10 PM
