Programmable Settings
14
Ringer settings
Important:
L
Before setting, make sure the TALK
indicator is off. The handset must be
operated near the base unit and while
off the base unit.
Handset ringer volume
4 levels (high/medium/low/off) are
available. The default setting is High.
Adjusting the handset ringer volume
1
Press
{^}
or
{V}
repeatedly to
select the desired volume.
2
Press
{
PROG
}
or
{
OFF
}
.
Turing the ringer volume off
Press and hold
{V}
until the handset
beeps 2 times.
To turn the ringer on, press
{^}
.
Note:
L
The handset rings at the low level
when paged by the base unit.
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There
are 3 tones and 4 melodies. The default
setting is Tone 1.
1
Press
{V}
or
{^}
.
2
Press
{
<
}
or
{
>
}
repeatedly to
select the desired setting.
L
You can also select the ringer tone
by pressing
{
1
}
–
{
7
}
.
{
1
}
–
{
3
}
: Tones
{
4
}
–
{
7
}
: Melodies
3
Press
{
PROG
}
or
{
OFF
}
.
Note:
L
If you select one of the melody ringer
patterns, the ringer will continue to
sound for several seconds if:
– the caller hangs up before you
answer the call.
– another person answers the call
using another phone connected on
the same line.
Telephone settings
Important:
L
Before setting, make sure the TALK
indicator is off. The handset must be
operated near the base unit and while
off the base unit.
Flash time
The flash time depends on your
telephone exchange or host PBX.
You can select: 90ms (milliseconds),
100ms, 110ms, 250ms, 300ms, 400ms,
600ms, or 700ms.
The default setting is 700 ms.
1
{
PROG
}
L
The TALK indicator flashes.
2
Press
{
1
}
–
{
8
}
to select the desired
setting.
{
1
}
: 90ms
{
2
}
: 100ms
{
3
}
: 110ms
{
4
}
: 250ms
{
5
}
: 300ms
{
6
}
: 400ms
{
7
}
: 600ms
{
8
}
: 700ms
3
{
AUTO
}
i
{
FLASH
}
L
The handset beeps.
Note:
L
The flash time depends on your
telephone exchange or host PBX.
Contact your PBX supplier if
necessary.
TG360x(e).book Page 14 Tuesday, February 3, 2009 5:10 PM