Panasonic KX-TG2740S - 2.4 GHz DSS Expandable Cordless..., Руководство по эксплуатации

Страница: 111 / 124

111
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
The Answering System is
on, but incoming messages
are not recorded.
“ ” is displayed
and the ANSWER ON
indicator flashes rapidly,
and no new messages are
recorded.
You cannot access a
mailbox from the base unit
or the handset.
You cannot access a
mailbox from a touch tone
phone.
While recording a greeting
message, the unit starts to
ring and stops recording.
During playback, incoming
call tones are heard.
ALL MAILBOX FULL
Cause & Remedy
•
The recording time is set to “Greeting only”. Select
“1 minute”, “2 minutes” or “3 minutes” (p. 27).
•
Memory is full. Erase some, or all, of the
messages (p. 88).
•
Memory is full. Erase some, or all, of the
messages (p. 88).
•
If more than one other user is using the
handsets and base unit, you may not be able
to access the mailboxes. Try again later.
•
If 2 other users are listening to messages in
the mailboxes, you cannot access a mailbox.
Try again later.
•
If the Answering System is responding to a
call and another user is listening to messages
in a mailbox, you cannot access a mailbox.
Try again later.
•
Your handset is too far from the base unit.
Walk closer to the base unit.
•
Make sure you enter the correct remote code
(p. 95).
•
If “ Enter Mailbox password ” is heard, Mailbox 2 or
3 has the password. Enter the password (p. 83).
•
The Answering System may not respond if
the tones are too short to activate the unit.
Press each button firmly.
•
The Answering System is off. Turn it on (p. 98).
•
To answer the call, press
(DIGITAL!SP-PHONE)
or the line button . Start
again from the beginning after hanging up.
•
To answer the call, if you are using the base
unit, press the called line button. If you are
using the handset, press the relevant soft key
(
or ). For playback, start again
from the beginning after hanging up.
LINE2 LINE1
Answering System