“
Making Calls
32
To put a call on hold
Press
(HOLD/CLEAR)
twice
.
≥
“
” flashes on the display, “
Hold
” is displayed
and the call is put on hold.
≥
To transfer the call to the base unit or another
handset (if the system has one or more additional
handsets, p. 28), see page 54; to transfer to a
mailbox to allow the outside party to leave a
message there, see page 76.
≥
If a call is kept holding for 6 minutes, an alarm tone will start to sound.
After 4 additional minutes on hold the call will be disconnected.
To release the hold
From the handset, press
or
.
From the base unit, press
(DIGITAL–SP-PHONE)
.
≥
If another phone is connected on the same line (p. 88), you can also release the
hold by lifting its handset.
≥
If the system has one or more additional handsets (p. 28), another handset user
can also release the hold by pressing
or
.
IN USE
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed with the handset are stored in the redial
list.
1. Press
(PAUSE/REDIAL)
.
≥
The last number dialed is displayed with
number 1.
2. Scroll to the desired number by pressing
(›)
or
(‹)
.
≥
You can also scroll down through the list by pressing
(PAUSE/REDIAL)
.
≥
To exit the list, press
(OFF)
.
3. Press
or .
≥
To erase an item
, repeat steps 1 and 2, and press
(HOLD/CLEAR)
.
≥
If “
No items stored
” is displayed, the list is empty.
333-4444
43
--Redial list1--
SP
PRIVACY
[1]
Hold
IN USE
P L A Y
Lighted handset keypad
The handset dialing buttons will light when you press a button or lift the
handset or when a call is received. The lights will go out a few seconds
after pressing a button to start operations, lifting the handset, answering a
call or pressing a button to complete operations such as hanging up a
call, viewing the Caller List/Directory or programming.
PQQX13405ZA-BM-3E 02.6.4 3:43 PM ページ 32
