“
23
Preparation
Date and Time
Voice Day/Time Stamp:
During playback, a synthesized voice will
announce the day and time that each message was recorded.
Make sure the base unit and the handset are not being used.
1
Press
(CONF/FUNCTION)
.
2
Scroll to “
Date and time
” by pressing
(›)
or
(‹)
.
3
Press
(fl)
.
4
1
Enter the year, month and date using
4-digit numbers. (e.g. To set Apr. 7,
2002, enter “2002” and “0407”.)
2
Enter the time (hour and minute) using
a 4-digit number. (e.g. To set 9:30, enter “0930”.)
≥
If you enter a wrong number, press
(fi)
or
(fl)
to move the cursor to the
incorrect number. Enter the correct number.
5
Select “AM” or “PM” by pressing
($)
.
6
Press the right soft key (
).
≥
A beep sounds and the clock starts working.
≥
If 3 beeps sound, the setting is not correct. Start again from step 4.
≥
To exit the programming mode, press
(OFF)
.
≥
You can exit the programming mode at any time by pressing
(OFF)
.
≥
When entering the time in step 4, you cannot enter numbers greater than 12.
Do not use military time.
(To set 13:00 hours, enter “0100”, and select “PM” by
pressing
($)
.)
SAVE
If a power failure occurs, the time may be shifted. When “
” flashes on the
base unit display, adjust the date/time.
To check the date/time
Repeat steps 1 to 3.
≥
The date and time will be displayed. When finished, press
(OFF)
.
Date:2002.01.01
Time:12:00 AM
2 1
0-9=Date&Time
¢
=AM/PM
Ringer setting
1
Date and time
Copy directory
S A V E
Date:2002.04.07
Time:09:30 AM
2 1
0-9=Date&Time
¢
=AM/PM
S A V E
Date:2002.04.07
Time:09:30 PM
2 1
0-9=Date&Time
¢
=AM/PM
S A V E
PQQX13405ZA-BM-2E 02.6.4 3:42 PM ページ 23
