63
Answering System
Storing a 1-800 pager number
If you use a 1-800 pager number with a PIN code, store the pager
number as follows.
1
Follow steps 1 through 6 on page 62.
2
#
Enter the 1-800 pager number, and press
(REDIAL/PAUSE)
3 times.*
$
Enter the PIN code, and press
(REDIAL/PAUSE)
twice.*
•
The entered number is displayed on the base unit.
•
If you misdial, press
(CLEAR)
and enter the correct number.
•
You can enter a total of 44 digits.
3
Press
á
(
Save
key).
•
A beep sounds.
•
To return to the standby mode, press
(OFF)
.
* Pager companies require a delay after the pager number and the PIN
code are dialed. Contact your pager company regarding the required
pause time. Pressing
(REDIAL/PAUSE)
once creates a 3.5 second
delay and counts as one digit.
•
If the line has rotary or pulse service, press
(TONE)
between the pager number
and
(REDIAL/PAUSE)
in step 2.
•
Alphanumeric voice dispatch pager services will not work with this function.
* Pager companies require a delay after the pager number and/or the
access code is dialed. Contact your pager company regarding the
required pause time. Pressing
(REDIAL/PAUSE)
once creates a
3.5 second delay and counts as one digit.
•
If the line has rotary or pulse service, press
(TONE)
between the pager number
and
(REDIAL/PAUSE)
in step 7.
8
Press
á
(
Save
key).
•
A beep sounds.
•
To return to the standby mode, press
(OFF)
.
