Panasonic KX-TG2235B - 2.4 GHz Digital Cordless..., Руководство по эксплуатации

Страница: 38 / 56

Voice Mail Service
38
Listening to Voice Mail Messages
After the voice mail box has received messages, the unit will indicate it in two ways:
(a) “
Voice Mail
” will be displayed on the handset, and (b) the VM indicator on the
base unit will flash.
To listen to your voice mail message(s)
• You can also listen to your voice mail message(s) by using [ ] or [ ] .
1. Press [ ] or [ ] .
2. Press
VM
within 15 seconds.
• After 15 seconds, “
VM
” will disappear and “
(VE)
” will
be displayed.
• If a voice mail access number is not stored, “
VM
” will not be displayed. To
store the number, see page 36.
3. Follow steps 3 and 4 of “To listen to your voice mail message(s)” above.
• If “
Voice Mail
” still remains on the display and the VM indicator still flashes even
if you have listened to your voice mail message(s), press and hold [OFF] until the
unit beeps. “
Voice Mail
” will disappear and the VM indicator will go out.
• If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “
Voice Mail
” may not be displayed and the VM indicator
may not flash.
• If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.
1
Press [MENU] .
2
Scroll to “
V.M. access
” by pressing [ ] or
[ ] , then press
Select
.
• The unit is connected to the telephone line and
dials the access number (p. 36) in speakerphone
mode.
• If the handset beeps 3 times and “
Store VM
access#
” is displayed, a voice mail access
number is not stored. To store the number, see
page 36.
3
Follow the pre-recorded instructions.
4
When finished, press [OFF] .
1
Press [VM] .
• The unit is connected to the telephone line and dials the access number
(p. 36) in speakerphone mode.
• If the base unit beeps 3 times, a voice mail access number is not stored. To
store the number, see page 36.
2
Follow the pre-recorded instructions.
3
When finished, press [SP-PHONE] .
Handset
>
>
V.M. access
Exit Select
>
>
1234567PPP890
(VE) Hold
Example
Talk
00-00-08
VM Hold
Base Unit
✿✤✦✩✫✩✿✮❃ ✦✫