Panasonic KX-TG1032SK Скачать руководство пользователя страница 23

Страница: 23 / 83

KX-TG1032SK/KX-TGA101S

8.3.

How to Clear User Setting

Units are reset to the Factory settings by this operation (Erase recorded Voice messages, stored Phone numbers, Caller list and
etc.)

Note:

• The reset menus differ depending on the following operations.
•

This operation should not be performed for a usual repair.

8.3.1.

Resetting both base unit and handset

Note:

(*1) Refer to

Registering a Handset

(P.34).

• Handset registration will not be reset.

8.3.2.

Resetting only handset

The only handset is reset by doing the following steps

Note:

(*2)

• The registration of the base unit and the handset are cancelled.
• If the handset needs to be registered to the base unit, refer to

Registering a Handset

(P.34).

• If users do not bring the base unit with them, the registration procedure has to be done by users themselves.
• Caller ID data will not be reset.

8.3.3.

Delete all handset registration of base unit

Содержание KX-TG1032SK




















































































Результаты поиска

Содержание KX-TG1032SK

Отзывы:

Похожие инструкции для KX-TG1032SK

Бренды по названию

Популярные бренды

Panasonic KX-TG1032SK, Руководство по обслуживанию

Результаты поиска

Содержание KX-TG1032SK

Отзывы:

Похожие инструкции для KX-TG1032SK

Бренды по названию

Популярные бренды