Panasonic KX-TDE600, Руководство по установке

Страница: 159 / 258

3.7.8 BRI4 Card (KX-TDA0284) and BRI8 Card (KX-TDA0288)
Function
BRI4: 4-port ISDN Basic Rate Interface card with 1 power failure transfer port. EURO-ISDN/ETSI
compliant.
BRI8: 8-port ISDN Basic Rate Interface card with 1 power failure transfer port. EURO-ISDN/ETSI
compliant.
LEDs
RJ45
(LINE 1 to LINE 8)
A B
To NT1/ Extension
Accessories and User-supplied Items
Accessories (included): Ferrite core(s)
´
1 (BRI4 card) or 2 (BRI8 card)
User-supplied (not included): RJ45 connector
CAUTION
•
If the connected ISDN terminal has no external power source, make sure that the power is supplied
from the BRI4/BRI8 card by programming the PBX accordingly.
However, if there is an external power source to the terminal, make sure that there is no power supplied
to the terminal from the BRI4/BRI8 card. Failure to do so may cause damage to the power supply circuit
of the BRI4/BRI8 card or the terminal.
•
When connecting these optional service cards to the trunk, connect through an NT1; do not connect
to the U interface of the trunk directly.
Notice
When connecting the RJ45 connector, attach the included ferrite core. Refer to "3.2.15 Attaching a Ferrite
Core".
Note
•
LINE 5 to LINE 8 are for BRI8 card only.
•
These optional service cards have 100
W
of terminal resistance. For use in point to multi-point
connection, the cards must be placed at the end of the bus.
•
These optional service cards can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
•
For details about power failure transfer, refer to "3.14.1 Power Failure Connections".
•
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "3.15.1 Starting the
PBX".
Installation Manual 159
3.7.8 BRI4 Card (KX-TDA0284) and BRI8 Card (KX-TDA0288)