background image

Category

Model No.

Description

Proprietary Equipment

KX-A228

S/M-type Back-up Battery Cable

KX-A229

L-type Back-up Battery Cable

KX-A258

Blank Slot Cover

KX-T30865

Doorphone

KX-T7765

*1

Note that the types of activation keys are subject to change without notice. For CA activation keys, refer to the documentation for
CA.

Equipment Compatibility

Compatible Panasonic Proprietary Telephones

The PBX supports the following telephones:

IP proprietary telephones (e.g., KX-NT300 series)

IP softphones (e.g., KX-NCS8100)

Digital proprietary telephones (e.g., KX-DT300 series)

Analogue proprietary telephones (e.g., KX-T7700 series)

Portable stations (e.g., KX-TCA355, KX-TCA256, KX-TD7690)

DSS consoles (e.g., KX-T7640)

Single line telephones (e.g., KX-T7710)

Incompatible Panasonic Proprietary Telephones

The PBX does not support the following telephones:

KX-T30800 series proprietary telephones and DSS consoles

KX-T61600 series proprietary telephones and DSS consoles

KX-T123200 series proprietary telephones and DSS consoles

KX-TD7500 DECT portable station

Note

For the equipment (e.g., Add-on Key Module, USB Module, Headset

*1

) that can be connected to a

particular telephone, refer to the telephone’s manual.

For other equipment that can be connected to the PBX, refer to "1.1.2  System Connection Diagram".

*1

The KX-T7090 headset can be connected to the KX-T7000, KX-T7200, KX-T7300, KX-T7400, and KX-T7500 (except for
KX-T7560/KX-T7565) series telephones.

Notice

This PBX supports SIP Extensions. However, some PBX features may not be available for SIP Extensions,
depending on your telephone type.

Under power failure conditions, the connected telephones may not operate. Please ensure that a separate
telephone, not dependent on local power, is available for emergency use.

Prior to connection of this product, please verify that the intended operating environment is supported.
Satisfactory performance cannot be guaranteed for the following:

interoperability and compatibility with all devices and systems connected to this product

proper operation and compatibility with services provided by telecommunications companies over
connected networks

6

Installation Manual

System Components

Содержание KX-TDE200













































































































































































































Отзывы: