Panasonic KX-TDE200, Руководство по установке

Страница: 37 / 204

Note for KX-NT265 IP-PT users
The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version,
follow the procedure below:
"
AP Version
".
Select
"Maintenance".
Software version
is displayed.
While starting up
Select
"Version display".
To exit the programming mode
PROGRAM
SP-PHONE
SP-PHONE
SP-PHONE
HOLD HOLD HOLD HOLD
Power Supply Unit Selection
The PBX needs a power supply unit (PSU) suitable for its configuration. Calculate the load figure from the type
and number of items of equipment to be connected, and determine the type of PSU that will be required.
Load Figure Calculation
Equipment Type Load Figure
PT KX-DT300 series DPT/KX-DT300 series DSS
console/KX-T7600 series DPT/KX-T7600 series
DSS console 1
KX-T7560/KX-T7565 DPT 1
Other DPT/Other DSS console 4
APT 4
IP-PT 0
SIP Extension 0
Extension Card
*1
DHLC8 8
SLC8 8
SLC16/MSLC16/CSLC16 16
CS (1 unit) 4
High-density CS (1 unit) 8
IP-CS (1 unit) 0
ISDN Extension 2
VPS (1 port) 1
*1 Only the extension cards that can support SLTs count for the load figures.
Installation Manual 37
1.3.3 System Capacity