manualshive.com logo in svg

Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008..., Руководство по функциям

Гибридный IP-PBX контроллер Panasonic KX-TDA600 обеспечивает передовые функции и возможности для организации современной бизнес-телефонии. Максимальное количество пользователей - 1008. Скачайте бесплатное руководство по программированию с нашего сайта для ознакомления с особенностями этого продукта.

Поделиться
Скачать
background image

1.13 P

242

Feature Manual

•

The monitor PBX stops receiving status information for the selected extension. All NDSS 
buttons for that extension stop displaying status information.

However, the related information is not deleted from the Network Monitor Extensions Table. Therefore, 
if an extension user at a monitor PBX subsequently goes off-hook and presses the NDSS button for 
that extension, monitoring will be reactivated. To completely remove monitoring of an extension, the 
registration data must also be deleted from the Network Monitor Extensions Table at each monitor PBX.

The monitor destination of each NDSS button is determined by the registration information for a 
particular index number in this table. Therefore, if the registration information for an index number is 
changed (for example, the Network Extension Number assigned to Index No. 001 in the example above 
is changed from "2001" to "4002"), any NDSS buttons that have been set for that extension will 
automatically point to the new monitor destination.

Conditions

•

Hardware Requirements:

The PLMPR/PMPR/PSMPR software file version of all PBXs in the network must be 2.0xxx or later.
The KX-TDA6920, KX-TDA0920, or KX-TDA5920 SD Memory Card for Software Upgrade to Enhanced 
Version must be installed in all PBXs that will monitor extensions or have extensions monitored.
If using an IP-GW4E (KX-TDA0484) or IP-GW4 (KX-TDA5480) card, the firmware (not LPR) of the card 
must be version 1.2 or later. If using a PRI23 card (KX-TDA0290), the LPR software of the card must 
be version 1.009 or later.

•

All PBXs in the network must be KX-TDA or KX-TDE series PBXs. For information on the hardware 
requirements for KX-TDE series PBXs that will monitor extensions or have extensions monitored, refer 
to the KX-TDE Feature Manual.

•

Each of Network PBX IDs 1-8 can only be assigned to one PBX within a network. Assigning the same 
Network PBX ID to two PBXs will cause network data transmission problems.

•

It is only possible to assign NDSS buttons for extensions that have been previously registered in the 
Network Monitor Extensions Table.
2.11.5 [4-1-4] Wired Extension—Flexible Button

→

 Type

→

 Dial (for NDSS)

2.11.13 [4-2-3] Portable Station—Flexible Button

→

 Type

→

 Dial (for NDSS)

2.11.17 [4-3] DSS Console

→

 Type

→

 Dial (for NDSS)

•

Extensions connected to one PBX can monitor a maximum of 250 extensions at other PBXs. One 
extension can be monitored by multiple extensions at multiple PBXs.

•

To reduce NDSS data traffic, it is recommended that 8 or less extensions in a single Incoming Call 
Distribution Group be monitored.

•

Activation of an NDSS button is only required the first time that a button for a newly registered extension 
is created. Once an NDSS button has been activated by being pressed the first time, any further NDSS 
buttons for the same monitored extension will automatically display the extension status without 
needing to be activated.

•

To use the NDSS Monitor Release feature, an extension must be assigned as a manager.

→

 2.9.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Manager

→

 [511] Manager Assignment

•

Through system programming, it is possible to assign a maximum number of "hops" (transfers between 
PBXs) that extension status information can travel. Each time a piece of extension status information 
is forwarded to another PBX, its counter is increased by one. When this counter reaches the assigned 
maximum, the data is discarded. This is used to prevent data from circling unnecessarily around the 

Содержание KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008...















































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008...

Yealink T60 Quick Reference preview
T60
Бренд: Yealink Страницы: 2
Panasonic KX-TA308 Manual De Instalación preview
KX-TA308
Бренд: Panasonic Страницы: 268
Radio Shack Cordless Telephone Owner'S Manual preview
Cordless Telephone
Бренд: Radio Shack Страницы: 12
D-Link DVC-1000 Manual preview
DVC-1000
Бренд: D-Link Страницы: 58
Xblue Networks PCS digital User Manual preview
PCS digital
Бренд: Xblue Networks Страницы: 32
Main Resource Axxess Series Instructions preview
Axxess Series
Бренд: Main Resource Страницы: 5
Savannah Speros NEC User Manual preview
Speros NEC
Бренд: Savannah Страницы: 9
Talkaphone VOIP-500E Quick Installation Manual preview
VOIP-500E
Бренд: Talkaphone Страницы: 6
Amplicom PowerTel 580 Combo Operating Instructions Manual preview
PowerTel 580 Combo
Бренд: Amplicom Страницы: 57
Clarity Professional C4230 Specifications preview
Professional C4230
Бренд: Clarity Страницы: 2
HP Premium Travel Phone User Manual preview
Premium Travel Phone
Бренд: HP Страницы: 24
HP K7V16AA User Manual preview
K7V16AA
Бренд: HP Страницы: 15
Philips DECT1221S/05 Quick Start Manual preview
DECT1221S/05
Бренд: Philips Страницы: 6
Philips CD5353S Specifications preview
CD5353S
Бренд: Philips Страницы: 2
Philips CD5353S Specification Sheet preview
CD5353S
Бренд: Philips Страницы: 2
Philips CD5354S Specifications preview
CD5354S
Бренд: Philips Страницы: 2
Philips CD5352S Specifications preview
CD5352S
Бренд: Philips Страницы: 2
Philips CD5351S Specifications preview
CD5351S
Бренд: Philips Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды