Panasonic KX-TDA5450, Руководство по установке

Страница: 56 / 86

Parameter & Description Default Value Range
Protocol
Specifies the protocol to which the IP filter rule is
applied.
Any Any, ICMP, IGMP, TCP,
UDP, RSVP, OSPF, GRE
Filter When
Specifies the direction of the IP packets (Input/
Output) to which the IP filter rule is applied.
Input Input: IP filter rules are
applied to IP packets that are
received at the interface
specified in
Interface .
Output: IP filter rules are
applied to IP packets that are
sent from the interface
specified in
Interface .
Interface
Specifies the interface to which the IP filter rule is
applied.
WAN (Fixed IP
Address/DHCP
Client), PPPoE LAN, WAN (Fixed IP Address/
DHCP Client), PPPoE
*4
*1 Enter "0 (0.0.0.0)" to apply the IP filter rules to all the IP packets.
*2
This setting is activated when " TCP ", " UDP ", or " TCP/UDP " is selected in Protocol .
*3
To specify the range, enter the lowest port number, hyphen and highest port number.
To apply the IP filter rules to all port numbers, enter "
0–65535 ". " 0 " can only be entered in this case.
*4 It is possible to select multiple interfaces.
In
Interface in the IP Filter Rules table, " Any " will be automatically displayed for the timing that is not selected in Filter
When .
4.
Click Set .
A confirmation screen is displayed, and the new setting is displayed in the IP Filter Rules table.
56 Installation Manual Document Version 2008-10
3.5.3 IP Filter