Panasonic KX-TDA5450, Руководство по установке

Страница: 53 / 86

3.5.2 Static Route
1.
Click 1.3.2 Static Route in the operation menu.
•
Current Active Route List : Current active routing lists are displayed. " link#1 " indicates the LAN port
of the card, and " link#2 " indicates the WAN port of the card.
•
Route Configuration Table : Available routing lists are displayed. If there is a route displayed in the
table, clicking the Delete button will delete the route from both Current Active Route List and Route
Configuration Table .
•
Add a Route : Additional routes can be specified.
2.
Assign each parameter referring to the descriptions below.
Parameter & Description Default Value Range
Destination IP Address
Specifies the destination IP address.
No default Available IP addresses (default
route: 0.0.0.0)
Destination Subnet Mask
Specifies the destination subnet mask address.
24 (255.255.255.0) 0, 8–32
Next Hop
Specifies a gateway by selecting either an IP
address or Interface.
No default Available IP addresses,
PPPoE
3.
Click Add .
A confirmation screen is displayed.
The new route specified in
Add a Route is added to Route Configuration Table . If the network is
connected, the route is also added to Current Active Route List . If not, the route will be queued and added
when the network is connected.
Document Version 2008-10 Installation Manual 53
3.5.2 Static Route