Panasonic KX-TDA15, Начало работы

Страница: 26 / 32

4.3 Programming the Hybrid IP-PBX
26 Getting Started
Assigning the Incoming Trunk Call Destination
5. a.
Under Configuration , click Slot .
b.
Move the mouse pointer over the BRI card,
then click
INS to set the card to in-service
status.
For analogue trunk users (DIL Setting):
1.
Under CO & Incoming Call , click DIL Table &
Port Settings .
2.
Confirm that the DIL tab is selected.
3.
Configure the settings as required.
4.
Click OK .
For ISDN trunk users (DDI Setting):
1.
Under CO & Incoming Call , click DDI / DID
Table .
2.
Configure the settings as required.
3.
Click OK .
For ISDN trunk users (MSN Setting):
1. Under CO & Incoming Call , click DIL Table &
Port Settings .
2. Click the DDI / DID / TIE / MSN tab.
3. Set the Distribution Method of the desired
ports to MSN .
4. Click OK .