Panasonic KX-TDA15, Начало работы

Страница: 19 / 32

3.1 Starting the Hybrid IP-PBX
Getting Started 19
3.
Plug the AC cord into the AC adaptor, and then plug the other end into an AC outlet.
4.
Turn on the power switch. The RUN indicator will flash.
Notes
• For safety reasons, follow the procedures as indicated when turning on the Hybrid IP-PBX.
• For safety reasons, do not stretch, bend, or pinch the AC cord and the DC cable of the AC
adaptor.
5.
While the RUN indicator is flashing, slide the System Initialise Switch back to the "NORMAL"
position. Depending on the configuration, initialisation takes about 1 min to 3 min. If successfully
executed, the RUN indicator will stop flashing and stay lit.
All data will be cleared and the Hybrid IP-PBX will be initialised to the default values. The DPTs should
show the time as 01:00.
IMPORTANT
Use only the AC adaptor (Panasonic PSLP1244/Panasonic PSLP1434) and AC cord
supplied with the Hybrid IP-PBX.
AC Adaptor
AC Cord
To AC outlet
Power Switch