background image

1.1

General Features

80

Features Guide

Completion of Calls to Busy Subscriber (CCBS)

Description

Allows the extension users to set the telephone to receive callback ringing when a busy called 
party on an ISDN line becomes free. A special dial tone informs the caller that the called party 
is busy. When the caller answers the callback ringing, other party's number is automatically 
dialled.
This feature is one of ISDN's services and its availability depends on the service of your 
telephone company.
This feature is in accordance with the ETS 300 359.
(ETS: European Telecommunication Standard)

Conditions

This feature is enabled or disabled by System Programming.

An extension can set only one CCBS at a time.

A proprietary telephone (PT), single line telephone (SLT) and portable station (PS) can set 
the CCBS to a busy party.

The CCBS that has been set by an outside party works only if the called busy extension is 
a PT or SLT and the call arrives via DIL 1:1, DDI 1:1 and MSN 1:1.

If the callback ringing is not answered in four rings (within 10 seconds) the callback is 
cancelled.

The callback rings even if the extension has set the Call Forwarding or DO Not Disturb 
(DND)

The caller can use the telephone before the callback rings. The setting is cancelled only in 
the following conditions.
– By the cancelling operation.
– If there is no callback ringing within 60 minutes.
– If the system power is off. / If you reset the system.

This feature does not work if the extension has set Data Line Security.

The time the system waits before sending a CCBS signal while hearing a special dial tone 
is programmable.

To activate this feature, use the following software version of the ISDN Card or Unit.

ISDN Card / Unit Type

Software Version

KX-TD280 / KX-TD281 /
KX-TD282

P071V / P072V or after

KX-TD286

P831H / P832H or after

KX-TD290

P851F / P852F or after

Содержание KX-TD816NE

















































































































































































































































































Отзывы: