1.1
General Features
Features Guide
245
Note
N/A: not available for assignment.
Note
•
The UCD Time Table is not available for incoming extensions or transferred calls.
•
The overflow extension is the IRNA destination of the hunting group or the CO line group
assigned by programme [134]-[135] "Hunting Intercept — Day / Night" or [409]-[410]
"Intercept Extension — Day / Night." If both of them are assigned, the IRNA destination of
the hunting group will be effective.
•
If the overflow extension is not assigned, the system will not answer the call and waits for
an idle extension.
•
If the Time Table number is not assigned, the system will not answer the call. In this case,
IRNA will be employed.
•
In sequence assignment, "Sx" can be assigned to a space other than the first only when
another "Sx" is assigned in the first space.
•
In sequence assignment, an assignment after "TR", "RT" or "Blank" is not available.
•
If a timer is the first item in a Time Table sequence, it will delay answering according to the
Timer's setting. The caller will hear a ringback tone.
•
Music on Hold after an OGM can be changed to a ringback tone by programme [990]
"System Additional Information, Area 01 - Bit 1."
Conditions
•
UCD can be used in the following cases:
a)
The floating number of UCD is assigned as the Direct In Lines (DIL) 1:1 destination.
b)
The floating number of UCD is assigned as the Intercept Routing destination.
c)
The floating number of UCD is dialled from an extension.
d)
The floating number of UCD is assigned as the Direct Dialling In (DDI) destination.
e)
The floating number of UCD is assigned as the UCD Overflow destination.
•
This feature requires assigning an UCD group in System Programming. An extension can
belong to two or more UCD groups.
•
The floating number can be assigned on a hunting group basis. The UCD group is based on
the hunting group.
•
It is possible to set the log-in or log-out status on an extension basis. An UCD call can be
sent to an extension in log-in status within the UCD group, but cannot be sent to extensions
in log-out status. If the extension would like to leave the group temporarily, the extension
sets the log-out status by the feature number to prevent UCD calls being sent to his / her
extension. When the extension re-joins the group, the extension sets the log-in status.
•
If all extensions are in log-out status, the system will not answer the call. In this case, IRNA
will be employed.
Содержание KX-TD816NE
