Panasonic KX-TD500 Скачать руководство пользователя страница 349 | Manualshive

Страница: 349 / 392

Panasonic KX-TD500 Скачать руководство пользователя страница 349

Programming Error Messages

Programming Guide

349

E5006

Cannot assign more than 1000 account codes.
There is a limit of 1000 account codes per system.

E5007

You have exceeded the tenant limit of Speed Dialing numbers.
The maximum number of Speeding Dialling numbers per tenant is specified in
"2-1 Tenant" screen.

E5008

You have exceeded the limit of Caller ID codes.
There is a limit of 1000 Caller ID codes per tenant and 2000 Caller ID codes per
system.

E5009

Invalid User code.
If the entire code, for ex. (1234), is included in another code, for ex. (12345), it is not
valid.

E5010

Specify the code.
The account code also must be entered when the TRS Level is assigned and the TRS
Level also must be deleted when the account code is deleted.

E5011

Specify the leading digits.
The ARS leading dial also must be entered when the Route Plan Table No. is assigned
and the Route Plan Table No. also must be deleted when the leading dial is deleted.

E5020

Charge Verification ID Code format error.
Please assign the Charge Verification ID code of 4 digits consisting of 0-9.

E5021

Don't keep Rate to be Blank.
The value of "Rate" must be always assigned.

E5022

File format error. (Line: X)
Format (syntax) error was found at the indicated line (X) in the database file.

E6001

Too long TRS Deny or Exception dial.
TRS Deny or Exception dial can be registered up to 10 digits consisting of 0–9, , #
or X (a wild card).

E6002

Cannot assign more than 400 TRS deny codes.
There is a limit of 400 toll restriction deny codes per system.

E6003

Cannot assign more than 200 TRS exception codes.
There is a limit of 200 toll restriction exception codes per system.

E7001

Invalid arrangement of time zones.
Each successive ARS time zone must be later in time. Namely, this pattern must be
followed: Time-A < Time-B < Time-C < Time-D.

E7002

Assign both trunk group number and modification table number.
Cannot assign just trunk group number or just modification table number.
Both must be assigned as a pair under ARS routing plan.

Error Code

Error Message

Description

«
...
347
348
349
350
351
...
»

Содержание KX-TD500









































































































































































































































































































































































































Отзывы:

Нет отзывов