Panasonic KX-TD500, Руководство по программированию, Страница: 129 / 392

Group
Programming Guide 129
Parameter Pause Time
Default 1.5 s
Value Range 1.
1.5 s
2.
2.5 s
3.
3.5 s
4.
4.5 s
Description/Function Specifies the length of pause time (dialling delay).
The programmed pause time is automatically inserted after a line
access code or a host PBX access code, or manually inserted when
the PAUSE button is pressed by the extension user.
Reference • 1.3 System Features (F/G)
– Host PBX Access
• 2.8.2 If a Host PBX is Connected (U/M)
Parameter PBX Access Code
Default Blank
Value Range
1-4 digits consisting of 0-9, or #
Description/Function Specifies the PBX access codes required to access the Host PBX or
Centrex service.
If the system is installed behind a host PBX or a Centrex system, an
access code is required to make an outside / Centrex call or to
access Centrex features.
Up to four codes can be assigned per Trunk Group.
Reference • 1.3 System Features (F/G)
– Host PBX Access
• 2.8.2 If a Host PBX is Connected (U/M)
Parameter [Numbering Plan ID] Outgoing—Public
Default Default
Value Range 1.
Default
2.
Unknown
3.
ISDN / Telephony
4.
National Standard
5.
Private
Description/Function Specifies the Numbering Plan ID applied to the outgoing CO calls
via ISDN Public Switched Telephone Network.
Reference • 3.2 VPN Features (F/G)
– Virtual Private Network (VPN)