Panasonic KX-TD500 Скачать руководство пользователя страница 275

Страница: 275 / 392

Features

Programming Guide

275

Parameter

Command Sequence (1-16)

Default

None

Value Range

None, S1 - S8, 1T - 4T, TR, RET, OFF

Description/Function

The following commands are provided to construct a UCD Time
Table procedure.

<Commands list and their functions>

None:
Skips to the next sequence.

S1 - S8:
OGM (1-8) is sent to the caller if available. If not, wait until
OGM (1-8) becomes available.

1T - 4T:
Callers are put in the waiting queue for N (1-4) 8 seconds
while hearing the ringback tone or music on hold.

TR:
Transfers a call to the Overflow destination.

RET:
Returns to the first step of the sequence.

OFF:
Disconnects the call compulsorily.

Note

•

If an unavailable OGM S(1-8) is assigned in the UCD Time
Table, it will be ignored.

Reference

• 3.3

Extension Group (P/G)

• 3.5

Incoming Group (P/G)

Содержание KX-TD500









































































































































































































































































































































































































Результаты поиска

Содержание KX-TD500

Отзывы:

Panasonic KX-TD500, Руководство по программированию, Страница: 275 / 392

Результаты поиска

Содержание KX-TD500

Отзывы: