Panasonic KX-TCD965EC Скачать руководство пользователя

Страница: 76 / 84

Before Requesting Help

Problem

“

” flashes and an alarm tone sounds

when you press

A busy tone sounds when you
press

“

” flashes during a conversation and

the call is disconnected.

Static, sound cuts in/out, fades.
Interference from other electrical units.

The handset does not ring.

The base unit does not ring.

You cannot dial.

You cannot redial.

You cannot program function items such
as the dialling mode.

You cannot store a name and phone
number in the phonebook.

Remedy

•

You are too far from the base unit. Move closer and
try again.

•

Plug in the AC adaptor.

•

Another handset is in use.

•

The handset is out of range. Move closer to the base
unit and make the call again.

•

Plug in the AC adaptor.

•

Locate the handset and base unit away from other
electrical appliances (p. 5).

•

Move closer to the base unit.

•

Turn the power ON (p. 14).

•

The ringer is set to OFF. Select the desired volume
level (p. 16).

•

The ringer is set to OFF. Set to HIGH, MEDIUM or
LOW (p. 17).

•

Check that the dialling mode selection is correct
(p. 15).

•

The unit is in call prohibition mode. Cancel the mode
(p. 47).

•

The dialled number is restricted. Cancel the number
(p. 49).

•

Key lock mode is set. Cancel the mode (p. 40).

•

Access numbers entered after pressing

will

not be included when redialling.

•

If the last number dialled was more than 24 digits
long, the number will not be redialled.

•

Programming is not possible while the unit is in the
talk or intercom mode.

•

Do not pause for over 60 seconds while
programming.

•

You cannot store a name and phone number while
the unit is in the talk or intercom mode.

•

Do not pause for over 60 seconds while storing.

Cordless Telephone

KX-TCD965EC-6(74~84) 99.9.27 7:59 PM Page 76

Содержание KX-TCD965EC





















































































Результаты поиска

Содержание KX-TCD965EC

Отзывы:

Похожие инструкции для KX-TCD965EC

Бренды по названию

Популярные бренды

Panasonic KX-TCD965EC, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD965EC

Отзывы:

Похожие инструкции для KX-TCD965EC

Бренды по названию

Популярные бренды