44
To continue the remote operation
When listening to your messages remotely, the unit will stop playback every 2 minutes and 40 seconds
and you will hear two beeps.
To continue playback, press
within 10 seconds after the beeps. If you do not press
within that
time, the unit will hang up. All messages will be saved.
Turning on the answering system
1
Call your unit and wait for 15 rings.
2
Press the remote code within 10 seconds after the long beep.
•
The unit will answer and the greeting message will be played.
•
The answering system will turn on. Hang up or enter the remote code for other options.
•
When turning on the answering system using a rotary or pulse service telephone, you cannot
enter the remote code for other options.
•
If your remote code is not stored, you cannot turn on the answering system remotely.
Skipping the greeting message
After calling your unit, press
during the greeting message.
•
The unit skips the rest of the greeting message and callers can start recording their message after
the long beep.
Recording your own message (Marker message)
You can record your own message after listening to the last message.
1
Wait for 3 beeps indicating the end of the last message and another 10 seconds for 2 more
beeps. Then leave your message.
2
When finished, hang up.
•
You can also record your own message after erasing all messages. After a long beep and “
No
message
” are heard, wait for another 10 seconds for 2 more beeps. Then leave your message.
9
9
Remote Operation from a Touch Tone Phone
KX-TCD961CXB(38~46) 99.12.3 2:19 PM Page 44
