Panasonic KX-TCD700NL Скачать руководство пользователя

Страница: 8 / 56

Battery Caution:

To reduce the risk of fire or injury to persons, read and follow these instructions.

1. Use only the batteries specified.

2. Do not use non-rechargeable batteries.

3. Do not mix old and new batteries.

4. Do not dispose of the batteries in a fire, they may explode. Check with local

waste management codes for special disposal instructions.

5. Do not open or mutilate the batteries. Released electrolyte is corrosive and

may cause burns or injury to the eyes or skin. The electrolyte may be toxic if
swallowed.

6. Exercise care in handling the batteries in order not to short the batteries with

conductive materials such as rings, bracelets, and keys. The batteries and/or
conductor may overheat and cause burns.

7. Charge the batteries provided with or identified for use with this product only

in accordance with the instructions and limitations specified in this manual.

• Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze

niet weggooien maar inleveren als KCA.

➡

Getting Started

Battery Replacement

If “

” flashes after a few telephone calls even when the handset batteries

have been fully charged, it is time to replace the batteries with new ones.
Remember to charge the new batteries after replacement (see page 7).

• Discard defective batteries as soon as possible. Defective batteries may leak

into the unit.

For maximum distance and noise-free operation, the recommended base unit
location is:
• Away from electrical appliances such as TV, radio, personal computer or

another telephone.

• In a convenient high and central location.

Base Unit Location

NL Niet

weggooien,

maar inleveren

als KCA.

30401 English KX-TCD700NL 25/4/01 2:32 pm Page 8

Содержание KX-TCD700NL



















































Результаты поиска

Содержание KX-TCD700NL

Отзывы:

Похожие инструкции для KX-TCD700NL

Бренды по названию

Популярные бренды

Panasonic KX-TCD700NL, Руководство по эксплуатации

Результаты поиска

Содержание KX-TCD700NL

Отзывы:

Похожие инструкции для KX-TCD700NL

Бренды по названию

Популярные бренды