background image

3

Prep

ara
tion

Important Information

Only use the power supply included with 
the product.
Do not connect the AC Adaptor to any AC 
outlet other than the standard AC230V.
The apparatus is approved for use with 
PQLV200ALZ power supply.
This apparatus is unable to make 
emergency telephone calls under the 
following conditions:

The portable handset batteries need 
recharging, or have failed.

During a mains power failure.

When the Key Lock is set to ON.

When the unit is in Direct Call mode.

Do not open the base unit or handset 
(other than to change the batteries).
This apparatus should not be used near 
emergency/intensive care medical 
equipment and should not be used by 
people with pacemakers.
Care should be taken that objects do not 
fall onto, and liquids are not spilled into 
the unit. Do not subject this unit to 
excessive smoke, dust, mechanical 
vibration or shock.

Environment

Do not use this unit near water.
This unit should be kept away from heat 
sources such as radiators, cookers, etc. It 
should also not be placed in rooms where 
the temperature is less than 5°C or 
greater than 40°C.
The AC Adaptor is used as the main 
disconnect device, ensure that the AC 
outlet is located / installed near the unit 
and is accessible.

Battery Caution

Use only specified batteries.

Only use rechargeable batteries.

Do not mix old and new batteries.
Do not dispose of batteries in a fire, they 
may explode.
Check local waste management codes for 
special disposal instructions.
Do not open or mutilate the batteries.
Released electrolyte is corrosive and may 
cause burns or injury to the eyes or skin. 
The electrolyte may be toxic if swallowed.
Exercise care in handling the batteries in 
order not to short the batteries with 
conductive materials such as rings, 
bracelets and keys.
The batteries and/or conductor may 
overheat and cause burns.
Charge the batteries provided in 
accordance with the information given in 
this operating guide.

Location

For maximum distance noise-free 
operation, place your base unit:

- Away from electrical appliances such 

as TV, radio, personal computer or 
another phone.

- In a convenient high and central 

location.

Safety Caution

The ringer tone is reproduced through the 
earpiece. To avoid damage to hearing, 
first answer the call, then hold the phone 
to the ear.

WARNING:

TO PREVENT THE RISK OF 
ELECTRICAL SHOCK, DO NOT 
EXPOSE THIS PRODUCT TO RAIN 
OR ANY OTHER TYPE OF 
MOISTURE.

400_NZ_E_02.fm  Page 3  Thursday, February 13, 2003  10:49 AM

Содержание KX-TCD400NZ

































Отзывы: