SMS (Short Message Service)
41
5
Press
$
, select
“
Edit Message
”
,
press
,
, then continue from step 4,
“Writing and sending a new message”,
page 40.
Erasing saved messages
1
Press
$
(middle soft key).
2
Select
X
, then press
,
.
3
Select
“
Send List
”
, then press
,
.
4
Press
{e}
or
{v}
repeatedly to select
the message, then press
,
.
5
Press
$
, select
“
Erase
”
, then press
,
.
L
To erase all messages, select
“
Erase
All
”
, then press
,
.
6
Select
“
Yes
”
, then press
,
.
7
Press
{ih}
.
Receiving a message
When an SMS message is received:
– a tone is heard (if the ringer is turned off,
this tone is not heard)
–
“
Receiving SMS Message
”
is
displayed
–
h
is displayed
– the total number of new (unread) SMS
messages is displayed next to
h
if the
screen saver (page 12) is turned off
Reading a received message
1
Press
$
(middle soft key).
2
Select
X
, then press
,
.
3
Select
“
Receive List
”
, then press
,
.
4
Press
{e}
or
{v}
repeatedly to select a
message.
L
Messages which have already been
read are indicated by a “
Q
”, even if
they were read using another handset.
L
To erase a message, press
w
,
select
“
Yes
”
, then press
,
.
5
Press
,
to read the message
content.
Note:
L
To call the message sender, press
{C}
or
{s}
.
L
If
“
SMS Full
”
is displayed, new SMS
messages cannot be received. Erase
unnecessary messages (page 41).
L
If you receive a message from a party
saved in the handset phonebook, the
stored name is displayed.
L
Some SMS service providers attach a 1-
digit number to the message sender’s
phone number, and sender names stored
in the handset phonebook may not be
displayed as a result.
Replying to a message
1
While reading a received message,
press
$
(middle soft key).
2
Select
“
Reply
”
, then press
,
.
3
Enter a message (page 43), then press
,
.
4
Edit the destination phone number
and/or press
,
.
5
Continue from step 6, “Writing and
sending a new message”, page 40.
Editing/forwarding a message
1
While reading a received message,
press
$
(middle soft key).
2
Select
“
Edit Message
”
, then press
,
.
3
Continue from step 4, “Writing and
sending a new message”, page 40.
Erasing received messages
1
While reading a received message,
press
$
(middle soft key).
TCD320FX(e).book Page 41 Tuesday, January 18, 2005 1:25 PM
