32
“
Troubleshooting
Problem
You cannot store a name
and phone number in the
phonebook.
While programming or
searching, the handset
starts to ring and stops the
program/search.
The handset does not
display the caller’s name
and/or phone number.
The display goes to the
standby mode while viewing
the Caller List.
When a second call is
received during a
conversation, the unit does
not display the new caller’s
name and/or phone number.
(HANDSET\LOCATOR)
does
not function.
Cause and Remedy
≥
You cannot store an item in the
phonebook while the unit is in the talk
mode.
≥
Do not pause for over 60 seconds while
storing.
≥
To answer the call, press
.
Start again from the beginning after
hanging up.
≥
You need to subscribe to a Caller ID
service from a telephone company.
≥
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
≥
Other electrical appliances connected to
the same outlet may be interfering with
the Caller ID information.
≥
Telephone line noise may be affecting
the Caller ID information.
≥
Do not pause for over 60 seconds while
searching.
≥
The caller requested not to send his/her
information. See page 14.
≥
The handset is too far from the base unit.
≥
The handset is engaged in an outside
call. Wait until the IN USE/CHARGE
indicator light goes out.
(–––/FLASH)
PQQX ZA-5 02.6.18 2:45 PM ページ 32
