Panasonic kx-ta6246 Скачать руководство пользователя страница 30

Страница: 30 / 135

1-20

Operations

1.3

Making Calls

• Helpful hints for the Handsfree operation:

— Use this unit in a quiet room for best performance.
— If you and the other party talk at the same time, parts of your conversation will be lost.

To avoid this, talk alternately.

• The handsfree mode is cancelled if you do not start dialling within 10 seconds.

• The KX-T7050 has MONITOR button instead of a SP-PHONE button. It can be used for

handsfree dialling, etc., but it cannot be used for a handsfree conversation.

• You can enable the handsfree mode by pressing a line key or INTERCOM button.

• See the Installation Manual, Section 3, “Handsfree Operation”.

Lift the handset.

Switching from handsfree to the handset mode

Allows you to dial and to talk to the other party without lifting the handset.

Handsfree Operation

Press SP-PHONE.

SP-PHONE

• The microphone and speaker are now activated.

Handsfree operation is available.

Press SP-PHONE.

SP-PHONE

Hang up.

• Do not replace the handset without pressing the SP-PHONE

button first, or the call will be terminated.

Switching from the handset to handsfree mode

☞

PSQX1709ZA-03.QX 99.10.15 9:56 AM Page 20

Содержание kx-ta6246








































































































































Результаты поиска

Содержание kx-ta6246

Отзывы:

Бренды по названию

Популярные бренды

Panasonic kx-ta6246, Руководство по эксплуатации

Результаты поиска

Содержание kx-ta6246

Отзывы:

Бренды по названию

Популярные бренды