background image

General Features

Features Guide

129

Line Preference — Incoming (No Line / Prime Line / 
Ringing Line)

Description

A proprietary telephone user can select the method used to answer incoming calls from the 
following three line preferences:

a)

No Line Preference
 No line is selected when you go off-hook. You must select a line to answer an incoming 
call.

b)

Prime Line Preference
 You can assign a prime line beforehand and answer a call on that line, when multiple 
calls are received simultaneously.

c)

Ringing Line Preference
When you go off-hook, you can answer the call ringing at your telephone.

Conditions

Setting a new line preference feature cancels the previous setting.

If Prime Line Preference is selected and an incoming call arrives from a line other than the 
prime line, it cannot be answered just by going off-hook. The Prime Line should be 
assigned to the Single-CO button.

If Ringing Line Preference is selected, going off-hook does not answer a line programmed 
for "no ring" even though there is an incoming call. Going off-hook during the delay time 
does not answer a line programmed for "delayed ringing".

A single line telephone is always set to Ringing Line Preference and cannot be changed. 

Programming Guide References

No programming required.

Features Guide References

None

User Manual References

2.2.2 Flexible Button Assignment

4.2.2 Receiving Calls

Содержание KX-TA1232

































































































































































































































Отзывы: