R
At the beginning of the message, the unit
plays the message at normal speed.
Fast-forwarding the message
Press and hold
MEN
until the unit plays the
desired part of the message.
R
During fast-forwarding, the handset makes
a continuous beeping sound.
Fast-forwarding speed may vary depending
on the recorded message.
R
Even if you press and hold
MEN
when the
end of this message is played, the next
message is played at normal speed.
Calling back (Caller ID
subscribers only)
1
Press
M
Menu
N
during playback.
2
MbN
:
“
Call Back
”
a
M
OK
N
Editing the number before calling back
1
Press
M
Menu
N
during playback.
2
MbN
:
“
Edit & Call
”
a
M
OK
N
3
Edit the number.
a
M
N
Erasing all messages
1
M
Menu
N
(right soft key)
#325
2
MbN
:
“
Yes
”
a
M
OK
N
a
M
N
Advanced new message
alerting features
Audible message alert
This feature allows the handset to beep to
inform you of a new message arrival when
new messages are recorded. The handset
beeps 2 times every minute until you listen to
the messages, if the
“
Handset Beep
”
setting is turned on. The default setting is
“
Off
”
.
1
M
Menu
N
(right soft key)
#339
2
MbN
: Select the desired setting.
a
M
OK
N
a
M
N
New message alert by an SMS
message or a call
This feature allows you to receive a
notification when new messages are recorded.
The following 2 methods are available:
– Notification by SMS: the base unit sends an
SMS message to a phone number you
specify, or
– Notification by phone: the base unit calls a
phone number you specify. You can then
operate the answering system remotely to
listen to the new message.
To use these features, you must:
– store a phone number to which the unit
makes the call to.
– turn on the new message alert setting for
SMS message or a call.
n
When you set “
SMS Setting
”:
You receive an SMS message which
shows
“
New message from
”
and caller
information. You can edit the message
“
New message from
”
to your desired
message (page 45).
n
When you set “
Call Setting
”:
After you answer the call of new message
arrival, you can listen to the messages on
that call (page 46).
Important:
R
A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
Turning on/off the new message alert
setting
1
M
Menu
N
(right soft key)
#338
2
MbN
:
“
On/Off
”
a
M
OK
N
3
MbN
: Select the desired setting.
a
M
OK
N
“
Off
”
This setting is turned off.
44
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Answering System
PNQX6093XA_0705_ver300.pdf 44
2013/07/05 15:29:59
