Other settings
Screen saver mode
The backlight goes dark when on a call or
turns off completely after 1 minute of
inactivity
if the handset is not on the base unit
or charger.
Activate the handset display again by:
– pressing
M
N
when on a call.
– pressing
M
N
at all other times.
One touch eco mode
The
M
R/ECO
N
button on the handset enables
you to activate the eco function with one
touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing
M
R/ECO
N
. The default setting is
“
Normal
”
.
– When the one touch eco mode is on:
“
Low
”
is temporarily displayed and
is shown
on the handset display instead of
.
– When the one touch eco mode is off:
“
Normal
”
is temporarily displayed and
goes off from the handset display.
Note:
R
When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R
Activating one touch eco mode reduces the
range of the base unit in standby mode.
R
If you set the DECT repeater mode to
“
On
”
(page 35):
– One touch eco mode is cancelled.
–
“
Eco Setup
”
is not shown in the
display menu (page 25).
14
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Getting Started
PNQX6093XA_0705_ver300.pdf 14
2013/07/05 15:29:56