Panasonic KX-NSX1000, Руководство пользователя

Страница: 92 / 456

code (e.g., "0") is assigned as the Host PBX Access code. All local calls (e.g., calls that do not require a
"0" to be dialled first) are treated as extensions of the telephone company and do not get recorded on
SMDR, because in this case this PBX recognises the telephone company as the host PBX.
Therefore, only long distance calls are recorded on SMDR.
PC Programming Manual References
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Host PBX Access Code
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—Option—ARS Dial
Feature Manual References
2.22.1.1 Station Message Detail Recording (SMDR)
6.1 Capacity of System Resources
2.5.4.9 Special Carrier Access Code
Description
If the PBX has access to multiple telephone companies, a Special Carrier Access code assigned through
system programming is required every time a trunk call is made without using ARS.
A preprogrammed Pause time will be automatically inserted between the user-dialled Special Carrier
Access code and the subsequent digits. (→ 2.5.4.7 Pause Insertion)
Conditions
•
TRS/Barring
TRS/Barring checks only the dialled telephone number excluding the Special Carrier Access code.
(→ 2.7.1 Toll Restriction (TRS)/Call Barring (Barring))
•
ARS
A pause is not automatically inserted between the user-dialled access code and the subsequent digits
when the ARS mode is enabled. (→ 2.8.1 Automatic Route Selection (ARS))
•
If this PBX is installed behind an existing host PBX:
A Special Carrier Access code and a Host PBX Access code should be assigned separately: these codes
cannot be assigned together as one code. (→ 2.5.4.8 Host PBX Access Code (Access Code to the
Telephone Company from a Host PBX))
PC Programming Manual References
15.3 PBX Configuration—[7-3] TRS—Special Carrier
Feature Manual References
2.8.1 Automatic Route Selection (ARS)
6.1 Capacity of System Resources
2.5.5 Seizing a Line Features
2.5.5.1 Seizing a Line Features—SUMMARY
Description
An extension user can select the line seized for making calls by the following methods:
2.5.5 Seizing a Line Features
92 Feature Manual