manualshive.com logo in svg

Panasonic KX-NSX1000, Руководство пользователя

Поделиться
Скачать
Panasonic KX-NSX1000 Скачать руководство пользователя страница 150

10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Assistant—Transfer to busy
Extension w/o BSS Operation
10.9 PBX Configuration—[2-9] System—System Options—Option 4—DSS Key—Automatic Transfer for
Extension Call
8.2.1 Users—User's Device Settings—Device Settings—Option 1—Transfer Recall Destination

Feature Manual References

5.1.1 Class of Service (COS)

Operating Manual References

1.4.1 Transferring a Call (Call Transfer)

2.12.2  SIP Refer Transfer

Description

If enabled through system programming, calls transferred to a SIP trunk will be transferred using the SIP
service provider’s Transfer feature instead of the PBX’s.
The following types of transfer are available:

Attended Transfer

Transfer is completed after announcing the transferred party.
From the extension user’s perspective, this is the same as
Call Transfer with Announcement (→ 2.12.1 Call Transfer).

Blind Transfer

Transfer is completed immediately after dialling the transfer
destination’s number.
This is similar to Call Transfer without Announcement (→
2.12.1 Call Transfer), except that the transferrer does not
hear even a ringback tone; the transferred call is connected
directly to the destination.

Conditions

[General]

•

The availability of this feature depends on the SIP service provider.

•

Since the SIP service provider takes control of the transfer, the transferred call cannot be returned to the
PBX for further handling even if the transfer fails.

 

[Blind Transfer]

•

ISDN extensions and SIP extensions cannot use this feature.

•

This feature cannot be used when calling through DISA (→ 2.16.1 Direct Inward System Access (DISA)).

Installation Manual References

4.4 Virtual Cards

Operating Manual References

1.4.1 Transferring a Call (Call Transfer)—Transferring to an Outside Party Using the SIP Service

PC Programming Manual References

9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW128—Port Property—Supplementary Service

→ Blind Transfer(REFER)
→ Attended Transfer(REFER)

2.12.2 SIP Refer Transfer

150

Feature Manual

Содержание KX-NSX1000









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды