manualshive.com logo in svg

Panasonic KX-NSX1000, Руководство пользователя

Поделиться
Скачать
Panasonic KX-NSX1000 Скачать руководство пользователя страница 37

13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—DISA
Intercept—Intercept when all DISA ports are busy
18.5 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous

→ Intercept—Intercept Routing - DND (Destination sets DND.)
→ Intercept—Routing to Operator - No Destination (Destination is not programmed.)
→ Intercept—Intercept Routing for Extension Call

Feature Manual References

2.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features

2.1.1.7  Intercept Routing—No Destination

Description

Provides automatic redirection of incoming trunk calls that do not have a destination assigned. The intercept
destination is an operator (tenant/PBX).

Conditions

•

Intercept Routing—No Destination on/off

The Intercept Routing—No Destination feature can be enabled or disabled through system programming.
If disabled, a reorder tone will be sent to the caller. However, the Intercept Routing—No Destination
feature always functions for calls through the ELCOT/CLCOT/LCOT, or T1 (LCOT/GCOT) card even
when disabled.

•

If an operator (tenant/PBX) is not assigned:

The extension that is connected to the lowest-numbered port and is ready to receive calls will be the
intercept destination.

•

Intercept Routing—No Destination also applies to calls from doorphones.

PC Programming Manual References

10.2 PBX Configuration—[2-2] System—Operator & BGM—PBX Operator—Day, Lunch, Break, Night
18.5 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous—Intercept—Routing to Operator - No
Destination (Destination is not programmed.)

Feature Manual References

5.1.5 Operator Features

2.1.2  Internal Call Features

2.1.2.1  Internal Call Features—SUMMARY

Description

The following types of internal calls are available:

Feature

Description & Reference

Intercom Call

A call from one extension to another.
 
→ 2.5.3 Intercom Call

2.1.2 Internal Call Features

Feature Manual

37

Содержание KX-NSX1000









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды