Panasonic KX-NS700 Скачать руководство пользователя

Страница: 571 / 580

Object ID

Item

Description

2.1.16

ifOutOctets

The number of Octets transmitted.

2.1.17

ifOutUcastPkts

The number of Unicast Packets which are received from upper
protocol.

2.1.18

ifOutNUcastPkts

The number of Non Unicast Packets which are received from upper
protocol.

2.1.21

ifOutQLen

The length of the output packet queue (in packets).

2.1.22

ifSpecific

Relevant MIB object identifier.

IP Group (1.3.6.1.2.1.4)

Object ID

Item

Description

ipForwarding

The value which indicates operation availability as a router
(whether Datagram is transferred or not).

ipDefaultTTL

Default value for IP Packet TTL (Time to Live).

ipInReceives

The total number of Packets received (including packet received in
error).

ipnHdrErrors

The number of Packets discarded due to errors in their header.

ipInAddrError

The number of Packets discarded because IP Address of the
destination was invalid.

ipInUnknownProtos

The number of Packets discarded because the protocol was
unknown/unsupported.

ipInDiscards

The number of incoming Packets discarded because of an
insufficient reception buffer.

ipInDelivers

The total number of Packets received (including ICMP) normally.

ipOutRequests

The total number of IP Packets (ICMP) which are tried to be
transmitted (relay Packet is not included).

ipReasmTimeout

The maximum number of seconds required in the buffer to rebuild
a fragmented Packet.

ipReasmReqds

The number of Packets that required rebuilding from a fragmented
state.

ipReasmOKs

The number of Packets that were rebuilt correctly from a
fragmented state.

ipReasmFails

The number of Packets that could not be rebuilt correctly from a
fragmented state.

ipFragOKs

The number of Packets that were fragmented correctly.

ipFragFails

The number of Packets that could not be fragmented correctly.

ipFragCreates

The number of IP datagrams created due to fragmentation.

ipAddrTable (NA)

Management Table of addressing information relevant to this
entity’s IP addresses.

20.1

IpAddrEntry (NA)

Components of ipAddrTable.

Feature Manual

571

6.4 Supported Management Information Base (MIB) Table

Содержание KX-NS700





































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание KX-NS700

Отзывы:

Похожие инструкции для KX-NS700

Бренды по названию

Популярные бренды

Panasonic KX-NS700, Руководство по функциям

Результаты поиска

Содержание KX-NS700

Отзывы:

Похожие инструкции для KX-NS700

Бренды по названию

Популярные бренды