WARNING
For All Telephone Equipment
•
Do not install the product in any other way than described in relevant manuals.
•
Do not install the product in a place exposed to rain or moisture, or a place where water, oil, or other liquids
can drip or splash onto on the product. Such conditions can lead to fire or electric shock, and may impair
the performance of the product.
•
Do not install the system in the following locations:
a.
Areas where shocks or vibrations are frequent or strong. Such activity may lead to the product falling
over and causing injury, or may impair the product’s performance.
b.
Areas with high amounts of dust. High amounts of dust can lead to fire or electric shock, and impair
the performance of the product.
•
Do not place the product on an unstable or uneven surface. If the product were to fall over, it may cause
injury or damage to the product.
•
Do not supply power to a combination of devices that exceeds the total rated capacity of the wall outlets
or extension cables used. If outlets, power strips, extension cords, etc. are used in a manner that exceeds
their rated capacity, they emit large amounts of heat, which could cause a fire.
•
The product must only be installed and serviced by qualified service personnel. The product should be
used as-is from the time of purchase; it should not be disassembled or modified. Disassembly or
modification can cause a fire, electric shock, or damage to the product.
•
Follow all warnings and instructions marked on the product.
•
Small objects, such as the hook clip and SD card pose a choking hazard. Keep small objects out of reach
of children.
•
Products that require a power source should only be connected to the type of electrical power supply
specified on the product label. If you are not sure of the type of power supply to your office/home, consult
your dealer or local power company.
•
For safety purposes some products are equipped with a grounded plug. If you do not have a grounded
outlet, please have one installed. Do not bypass this safety feature by tampering with the plug.
•
When installing telephone wiring, basic safety precautions should always be followed to reduce the risk of
fire, electric shock and injury to persons, including the following:
a.
Never install telephone wiring during a lightning storm.
b.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
c.
Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected
at the network interface.
d.
Use caution when installing or modifying telephone lines.
e.
Anti-static precautions should be taken during installation.
•
Unplug the product from the wall outlet and have it serviced by qualified service personnel in the following
cases:
a.
When the power supply cord or plug is damaged or frayed.
b.
If liquid has been spilled into the product.
c.
If the product has been exposed to rain or water.
Document Version 2016-03
Installation Manual
17
1.1 For Your Safety
Содержание KX-NS700
