Panasonic KX-NS300, Начало работы

Страница: 30 / 60

6. In the LAN settings:
The IP addresses for the PBX, DNS server, and DSP
cards can be assigned automatically through a DHCP
server or entered manually.
When using a DHCP server:
a.
Select Obtain an IP address automatically .
b.
Select Obtain DNS server address automatically .
c.
Select Obtain DSP IP address automatically .
Notice
The boxes will turn grey and the IP address
information will be assigned automatically.
Write down the address information assigned to
the PBX for future reference.
d.
Click Next .
When not using a DHCP server:
a.
Select Use the following IP address .
b.
Enter an IP address
*1
, subnet mask
*2
, and default
gateway
*1
. (You may not need to specify the default
gateway, depending on your network configuration.)
c.
Select Use the following DNS server address .
d.
Enter the preferred and alternative DNS IP
addresses
*1
.
e.
Select Use the following DSP IP address .
f.
Enter IP address
*1
for installed DSP card.
g.
Click Next .
*1 Valid IP address range: "1.0.0.1" to "223.255.255.254"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255"
(except "0.0.0.0" and "255.255.255.255")
30 Getting Started
4.1.1 Easy Setup Wizard