Panasonic KX-MC6260E, Руководство по эксплуатации

Страница: 94 / 128

10. Help
94
10.3.6 Using an SD card
I cannot hear a dial tone.
L
The telephone line cord is connected to the
[
EXT
]
socket on the unit.
Connect to the
[
LINE
]
socket (page 19).
L
If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall socket directly. If the unit operates properly,
check the splitter/coupler.
L
Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
L
The mains lead or telephone line cord is not connected. Check the
connections (page 19).
L
If you connected the unit through a computer modem, connect the unit
directly to a telephone line socket.
The unit does not ring.
L
The ringer volume is turned OFF. Adjust it (page 22).
The other party complains
they only hear a fax tone and
cannot talk.
L
FAX ONLY mode is set (page 49). Tell the other party the number is only
used for faxes.
The
{
Redial
}
or
{
Pause
}
button does not function
properly.
L
If this button is pressed during dialling, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialled will be
redialled.
I cannot receive a fax
document on the computer.
L
Make sure the following features are set beforehand.
–
PC fax reception (feature #442 on page 65)
– Computer setting for the PC fax reception (feature #443 on page 25)
I cannot display a received
fax document.
L
You must set the fax preview mode to ON (feature #448 on page 65)
beforehand.
L
You cannot display a received fax document during printing, copying or
scanning. Try again after printing, copying or scanning.
I cannot erase a received fax
document.
L
View or print a received fax document before erasing (page 51).
Received fax documents do
not print automatically.
L
Feature #448 is activated and the received fax documents are saved into
the memory of the unit. View the received documents on the display (page
51).
Problem Cause & Solution
No image are displayed.
L
There is no SD card inserted in the unit. Insert a supported SD card (page
81).
L
The inserted SD card is not compatible with the unit. Use a supported SD
card (page 81).
L
There is no files stored on the SD card. Save files on the SD card in a
supported file format beforehand.
L
The file is too large or is in an unsupported format. Use a supported file
format (page 31).
It takes considerable time to
display an image.
L
It may take some time until the image is displayed, depending on the image
format and size of the image. This is normal.
Problem Cause & Solution